The Adjustment For Rear Brake Pedal - VOGE DS525X 2019 Operation Manual

The adjustment for rear brake pedal

·Keep the height of rear brake pedal at a suitable position,
if is too high, it may step by mistake in using, which leads
to friction between brake pads and plate and makes them
damage.
·For ensuring the brake reliability, the free travel of rear
brake pedal shall be within 25-35mm, in case it is incorrect,
adjust as below:
–Remove the split pin 1
–Remove the pin axis 2
–Loosen the nut 3 on adjusting stud
–Turn clockwise or anticlockwise the connecting part 4 on
adjusting stud
–Turn it clockwise the height of brake pedal may rise, or turn anticlockwise it may fall down.
–Lock up the nut of adjusting rod when the brake pedal adjusted to the suitable height.
–Re-assembly is completely opposite to disassembly.
·
Replace for new split pin when re
·
Repeatedly press and release the brake pedal for clearly feeling the pressure point
·
In case the pressure point could not be felt
·
Incorrect adjustment makes the brake pads and plate always under stress which lead
.
to damage
!
Danger
- .
assembly
,
ask and contact the VOGE authorized distributor
4
3
1
2
The free travel of rear brake pedal: 25-35mm
The fastening torque for nut of adjusting stud: 18N.m
.
.
39