Replace the oil in engine
·
When the motorcycle reached the maintenance period
replace the oil in engine
·
Replace the oil when the engine is hot to completely drain the
.
oil off
·
The method for oil replacement
–
Make the motorcycle upright by parking stand
–
Screw off the cap of oil filling
.
remove
–
Lay an oil dish under the oil drainage bolt
,
bolt by tools
then drain off the oil
When re-assembled the oil drainage bolt, replace for a new one and its sealing copper
washer, in case adopted the original one, it may lead to oil leakage.
The complete draining off can be done when the engine is hot, but the hot oil and
muffler may make you hurt, so drain the oil off before the bolt and muffler completely
cooled down.
62
.
:
-
up port anticlockwise and
.
Screw up the oil drainage bolt before filling
!
!
,
.
,
then remove the
Warning
Danger
Copper washer for seal
-
up new oil
.