VOGE DS525X 2019 Operation Manual page 38

ABS switch
When long pressing ABS switch, get ABS On/Off, when the ignition switch got on once again, the
default for ABS is on.
Under some special road conditions or operations, such as extreme off-road or stunt show, we may not
need ABS, at this moment, we can get it off for a while. Except the situations above, to ensure driving
safety, please always keep ABS on.
There are 2 ways for shifting the open and off of ABS.
1. When the motorcycle was power on, while the motorcycle is parking, long press the ABS on right
switch assy. for 3~5 seconds, at this moment, the ABS is getting off while indicating light permanently
on. At this moment (Without cutting off power supply from beginning), long press ABS once again for
3~5 seconds, the indicating light goes off, the ABS recovered working.
2. When the ABS was already off, while motorcycle is parking, turn off the ignition switch, then turn on
the ignition switch once again, the ABS automatically recovered working.
Horn button" "
When press down the button " ", the horn works.
Turning signal light switch
When pushed the turning signal light switch on left switch assembly to the left " ", the front and
rear left turning signal lights would be on, whose indicator light " " on instrument also on.
When pushed the turning signal light switch on left switch assembly to the right " ", the front and
rear right turning signal lights would be on, whose indicator light " " on instrument also on.
When press the turning signal light switch on left switch assembly inwards, the turning signal light
goes off while its indicator light off.
TCS switch
When long pressing the TCS switch, get TCS On/Off, when the ignition switch got on once again, the
default for TCS is on.
33