Adjustment For Throttle Grip; Adjustment For Clutch Lever - VOGE 500DS User Manual

Adjustment for throttle grip

· The throttle grip is for controlling the engine rotation
· Turn to driver direction is acceleration the opposite
direction is deceleration
· Adjust the gap of throttle cable
– Remove the rubber jacket 1
– Loosen the locking nut 2
– Turn the adjustor 3 which adjust the gap of throttle cable
within 2 4mm - .
– Lock up the nut 2 .
– Re assemble the rubber jacket 1 -
Adjust the clutch lever
· Firmly grasp the clutch lever when starting engine braking
or gearshift to let the clutch plates separate for cutting off
the engine power .
· The free travel at the end of clutch lever shall be within
5 8mm in case it is incorrect adjust as below - ,
– Remove the rubber jacket
– Loosen the locking nut 1
– Turn the adjustor 2 for ensuring the free travel
within 5 8mm - .
– Lock up the nut 1 .
– Re assemble the rubber jacket -
· When the throttle cable adjusted make sure the throttle grip return automatically without idling rise
· When the throttle cable adjusted turn the handle bar to its left and right limit respectively without idling rise
,
.
.
.
.
,
.
,
.
,
,
.
,
.
The free clearance at the end of clutch lever 5 8mm
Too large the free travel of clutch lever may lead to
abrasion or malfunction of clutch set and gear box .
!
Caution
1
3 2
The free clearance of throttle cable 2 4mm
!
Warning
: - .
2 1
: - .
.
.
27