VOGE DS525X 2019 Operation Manual page 66

·The method for draining off the oil
–In case the oil level is too high, remove the oil drainage
bolt by socket wrench, the position of oil drainage bolt is
shown as figure 1 below, which at the lower left of engine.
–After suitable amount of oil outflow, screw up the oil
drainage bolt.
Too low or high the oil level may both damage the engine.
Please make sure the oil level at the correct position.
The oil may expand with the temperature rise, so the oil level changes with the
temperature.
The oil in hot engine may be higher and lower under cold status, which are both normal.
When checking the oil level make sure the motorcycle upright, which is so called vertical
to the ground.
!
Caution
1
61