How To Fold The Stretcher; How To Extend The Stretcher - Ferno ScoopEXL User And Maintenance Manual

ScoopEXL stretcher

4.3 How to fold the stretcher

1. Place the stretcher on a flat surface.
2. Place the locking levers in the unlocked position,
facing upwards, on both sides of the stretcher (Figure 8).
Refer to section "Length adjustment".
3. Fully extend the foot section so that the hinges are fully
visible (Figure 9).
4. Place the foot section on the body section (Figure 11).
5. Place the levers in the locked position, facing downwards,
on both sides of the stretcher (Figure 10).
6. If the stretcher is not in use and is stored folded, ensure
Figure 8 - Locking lever facing upwards
that the levers are in the closed position (facing downwards).

4.4 How to extend the stretcher

If the stretcher is folded (Figure 11), proceed as follows to
extend it:
1. Place the stretcher on a flat surface.
2. Lift the foot section and place it on the same supporting
surface as the body section.
Hinges
3. Release the locking levers by turning them upwards (to
unlock the levers, see the section Length Adjustment).
Figure 9 - Positioning the foot section
4. Adjust the length of the stretcher and lock it in the desired
on the body section
position (to correctly adjust the stretcher length, please refer
to the section Length adjustment).
Figure 10 - Locking lever facing downwards Figure 11 - ScoopEXL folded
13
© Ferno S.R.L. ScoopEXL - Rel.31102023 - ENG