Table of Contents
Advertisement
COMPONENTS OF THE STRETCHER
Lifting handles (2 on head end and 2 on foot end)
●
Side handles (8, 4 on each side): each handle can
●
have a pin inside for locking snap-hook restraints,
depending on the model.
Small side holes (2) for attaching the "H"-shaped
●
Velcro strap of the B-lock head immobiliser.
TSL Twin Safety Lock locking systems (2). Each TSL
●
is equipped with buttons for opening the stretcher.
Side locking levers (2) for stretcher length adjustment.
●
Snap-hook restraint locking pins, for models featuring
●
pins. (8)
3.5 General specifications
Ferno reserves the right to change the specifications without
notice. For further details, please contact Ferno's Customer
Service.
Specifications
Load capacity
Weight
Length
Folded
Position 1
Position 2
Position 3
Position 4
Width
Total
Shimming
Open
Folded
Materials
Structure
TSL
USER AND MAINTENANCE MANUAL
To request additional free copies of the
instruction
manual,
visit
www.ferno.it
10
500 lbs
227 kg
17.64 in
8 kg
47.24 in
1200 mm
64.84 in
1647 mm
69.68 in
1770 mm
74.40 in
1890 mm
79.13 in
2010 mm
17.28 in
439 mm
2.75 in
70 mm
3.14 in
80 mm
HDPE
aluminium
the
website
WARNING
Improper use of the stretcher may cause damage
and/or injury. Use the ScoopEXL stretcher as
described in this manual.
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualified staff to use the ScoopEXL stretcher
WARNING
Never exceed the load capacity of the stretcher
specified in this manual.
WARNING
Never connect lifting devices to the stretcher pins.
The pins are only intended for connecting snap-
hook restraints.
Load capacity
Never exceed the load capacity of the ScoopEXL
stretcher. Inspect the stretcher if the load capacity has
been exceeded (see section Inspection).
227 kg
500 lb
36 st
© Ferno S.R.L. ScoopEXL - Rel.31102023 - ENG
ScoopEXL stretcher
.
Advertisement
Table of Contents
