Glossary Of Symbols; Information And Safety Labels - Ferno ScoopEXL User And Maintenance Manual

ScoopEXL stretcher

1.5 Glossary of symbols

The symbols used in this manual and/or on the label on the stretcher are defined below. The CE mark is present on the stretcher
and in this manual.
Read the user manual
carefully
Part number (abbreviated
with PN, P/N, part no.,
or part #) unambiguously
identifies a specific part of
the design.
Unlocked Locked

1.6 Information and safety labels

The information and safety labels contain important information that the user needs to know.
Read and follow the label instructions. Replace worn and damaged labels immediately. To obtain replacement labels, contact
Ferno S.R.L.'s Customer Service.
The Manufacturer's references, CE mark and serial number can be found on the back of the stretcher (on the right-hand side of
the body section, operator view).
227 kg
500 lb
36 st
Load capacity (in kilos, pounds and stones)
Never exceed the load capacity of the ScoopEXL stretcher. Inspect the
stretcher if the load capacity has been exceeded (see section Inspection).
© Ferno S.R.L. ScoopEXL - Rel.31102023 - ENG
2
The stretcher
requires at least two
qualified operators
A catalogue
number indicates
the manufacturer's manufacturer's serial
catalogue number in number in order to
order to identify the
medical device.
Do not lubricate
227 kg
500 lb
36 st
Load capacity
(in kilos,
pounds and stones)
A serial number
indicates the
identify a specific
medical device.
Lubricate Do not wash with high
This product meets
European Union
Standards
A lot code indicates
the manufacturer's
lot code in order to
identify the lot.
pressure water
Main Label
QR Code
Medical Device
Conditions for
MR Safety
5