Related Manuals for Ferno Mondial ST64
Summary of Contents for Ferno Mondial ST64
- Page 1 Mondial® Transporter ST64, ST70 Users’ Manual November 2017 Pub. No. 234-3449-08 Read this Manual and Retain for Future Reference...
-
Page 2: Ferno Customer Relations
Limited Warranty Statement 1.937.382.1451 The products sold by Ferno are covered by a limited warranty, which is printed on all Ferno invoices. The complete terms and conditions of Ferno Washington Italia S.r.l. the limited warranty, and the limitations of liability and disclaimers, via B. -
Page 3: Table Of Contents
EZ Load™ Automatic Leg Release (Loading-End Legs) ____ 13 4.10 EZ Load™ Automatic Leg Release (Control-End Legs, Optional) ________________________ 13 4.11 Safety-Lock Device (Optional) _______________________ 14 4.12 Leg Lock (Blue Lever, Optional) ______________________ 14 © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 4: Safety Information
Use of a Ferno cot/transport system Attaching improper items to the transporter can cause with a non-Ferno fastening system is misuse of the Ferno product. The injury. Use only Ferno-approved items on the transporter. user assumes responsibility for the outcome of known, intentional misuse. -
Page 5: Symbol Glossary
Safety Information 1.6 Symbol Glossary The symbols defined below are used on the transporter and in this users’ manual. Ferno uses symbols recognized by the International Standards Organization (ISO), American National Standards Institute (ANSI) and the General Warning of QR Code (Scan with Smartphone to emergency medical services industry. -
Page 6: Operator Focus
Safety-Lock Device (if equipped) Stretcher” on page 16. are located. This loading end is the first portion of the transporter to be loaded into an ambulance, and last to be unloaded. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 7: About The Transporter
● CERTIFICATION EFX2, EFX3, EFX4 stretchers ● The Mondial® ST64 or ST70 transporter, when used with a Ferno® Mondial® or EFX stretcher plus a Ferno® FL1 or EFX-Lock fastening COMPATIBLE FERNO® FASTENING SYSTEMS system, meets European Harmonized Standards. Ferno® FL1 ●... -
Page 8: Components
Wheel Lock (2) Control End Loading End Load Capacity 600 lb Inspect the transporter if the load capacity 270 kg has been exceeded. See “Inspecting the 42.5 st Transporter” on page 25. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 9: General Specifications
3.4 General Specifications 3.5 Bed Positions Most general specifications are rounded to the nearest whole number. For more information, contact Ferno Customer Relations (page 2) or your Ferno distributor. Ferno reserves the right to change specifications without notice. MODEL ST70 AND MODEL ST64... -
Page 10: Using The Features
Control Operatore: Release the lever. Both Operatorse: Grasp the stretcher with both hands and lift the Figure 3 - Stretcher Release Lever stretcher off the transporter. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 11: Swivel-Lock Release Lever
The swivel caster lock pins are not designed to be lubricated. See ● Lock Pin “Lubricating the Transporter” on page 26. Use warm water and a mild detergent to clean the lock pins when needed. Caster Trailing End Figure 5 - Swivel Caster © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 12: Stretcher Slam Latches
The function of the wheel versions is identical, other than the conductivity feature. To order a set of conductive wheels, contact Ferno or your Ferno distributor. See “Parts, Service, and Accessories” on page 27. Figure 8 - Conductive Wheel (Left) and Wheel with Spokes (Right) ©... -
Page 13: Intermediate Loading Wheels
The operators continue pushing the transporter into the ambulance. The folded loading-end legs automatically unlock the control-end legs for folding. The operators finish pushing the transporter into the ambulance and secure it in a Ferno® fastening system. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 14: Safety-Lock Device (Optional)
Both Operatorse: Set the transporter down when you reach ○ your destination. Control-end Operatore: Disengage by pushing the blue leg lock ○ lever toward the loading end of the transporter. Figure 12- Leg Lock Lever © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 15: Using The Transporter
Ferno Patient Restraint Systems (Not Supplied) Select appropriate restraints for the patient being transported. ● Metric Imperial Ferno Product A list of Ferno patient restraint systems compatible with the Patient Weight Patient Weight transporter is at right. Model 678 Pedi-Mate® 4.5-18.1 kg 10-40 lb Lift only the weight you can safely handle. -
Page 16: Attaching And Removing A Stretcher
WARNING A Stretcher An improperly secured stretcher can separate from The transporter is designed for use with many Ferno® stretchers and the transporter and cause injury. Attach the stretcher stretcher chairs. See “Compatible Stretchers and Stretcher Chairs” on securely and verify that the slam latches have locked. -
Page 17: Changing Transporter Positions
After releasing the control handles, press down on the ○ transporter main frame to verify the transporter does not continue to lower. If needed, raise the transporter until you hear an audible “click” ○ from the locking mechanism. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 18: Transferring The Patient
Before moving the transporter or changing its position, verify that sheets and other articles are positioned where they will not Figure 17 - Transferring the Patient interfere with transporter operation. Raise the transporter to a rolling position. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 19: Rolling The Transporter
(Figure 18). Grasp the main frame with both hands, communicate with one another, and attend the patient as you roll and steer the transporter. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 20: Loading The Transporter
Continue pushing the transporter into the ambulance. Either Operatore: Secure the transporter in a fastening system. Fold the folding tray ramp if needed. Figure 20 - Loading the Transporter © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 21: Unloading The Transporter
This will allow the transporter to be removed from the catch plate. See “Safety-Lock Device” on page 14. Figure 22 - Unloading the Transporter © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 22: Carrying The Transporter
(Figure 26). Follow the procedures in “Loading the Transporter” on page 20 and “Unloading the Transporter” on page 21. Figure 25 - One Operator Changing Positions Figure 26 - One Operator Loading or Unloading © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 23: Using Additional Help
Load Capacity Follow local protocols. 600 lb Inspect the transporter if the load capacity 270 kg Ferno recommends that helpers work in pairs to help maintain ● has been exceeded. See “Inspecting the 42.5 st transporter balance. Transporter” on page 25. -
Page 24: Maintenance
EVERY 4 YEARS OR 20,000 CYCLES Leg control box assembly (each end) [090-5919] ● Loading-leg lock spring (2) [190-2043] ● Center control box assembly [090-5920] * ● * If equipped with control-end leg auto-release. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 25: Disinfecting The Transporter
Do the wheel locks engage properly and stop wheel ● rotation? Is the ambulance properly prepared for the transporter ● with an approved Ferno fastening system installed? Do installed accessories operate properly without ● interfering with transporter operation? © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 26: Lubricating The Transporter
The channels do not require lubrication. Lubricating the channels or rollers will cause foreign particles to stick to the rollers and channel, causing damage. Do Not Lubricate Lubricate Clean only with mild detergent and water. © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 27: Parts, Service, And Accessories
To order Ferno parts, and for professional transporter repair, contact Scuff strips with rollers, complete set of control-end and 083-2192 your Ferno distributor. Your distributor is the only agent authorized by loading end (ST70/MB70) Ferno to manage, service, and repair Ferno products. -
Page 28: Training Record
Training Record TRAINING RECORD Training Method Trainer Date Printed Name Signature Initials Read Video/ Hands-On Manual Online © Ferno-Washington, Inc. / 234-3449-08 / November 2017... -
Page 29: Maintenance Record
Maintenance Record MAINTENANCE RECORD Date Maintenance Performed © Ferno-Washington, Inc. / 234-3449-08 / November 2017... - Page 30 Training Record TRAINING RECORD Training Method Trainer Date Printed Name Signature Initials Read Video/ Hands-On Manual Online © Ferno-Washington, Inc. / 234-3449-08 / November 2017...
- Page 31 Maintenance Record MAINTENANCE RECORD Date Maintenance Performed © Ferno-Washington, Inc. / 234-3449-08 / November 2017...
- Page 32 © Ferno-Washington, Inc. / 234-3449-08 / November 2017...