Ferno ScoopEXL User And Maintenance Manual page 20

CHEST RESTRAINTS
1. Hook the snap-hook of the first chest restraint onto
pin 9 (patient's right side). Pass the restraint over the
shoulder and chest of the patient, hooking the second
snap-hook onto pin 4 on the opposite side (patient's left
side). Depending on the patient's height, the restraint
can be hooked onto pin 3 or 4.
2. Hook the snap-hook of the second chest restraint onto
pin 2 (patient's left side). Pass the restraint over the
shoulder and chest of the patient, hooking the second
snap-hook onto pin 7 (Figure 24) on the opposite
side (patient's right side). Depending on the patient's
height, the restraint can be hooked onto pin 7 or 8.
3. Properly adjust the restraint tension so that there is
no particular constraint to the patient (Figure 25).
Figure 24 - Application of the first chest restraint
Figure 25 - Adjustment of chest restraints
20
Figure 23 - Snap-hook restraint
WAIST RESTRAINT
1. Hook the first snap-hook to pin 7 (Figure 26).
2. Pass the restraint over the patient's legs.
3. Hook the second snap-hook to pin 4 on the opposite
side.
4. Properly adjust the restraint so that there is no
particular constraint to the patient (Figure 27).
Figure 26 - Leg restraint application
Figure 27 - Leg restraint adjustment
© Ferno S.R.L. ScoopEXL - Rel.31102023 - ENG
ScoopEXL stretcher