Semi-Verticalisation Procedure - Ferno ScoopEXL User And Maintenance Manual

ScoopEXL stretcher

5.6 Semi-verticalisation procedure

The semi-verticalisation procedure must be performed by at
least two operators trained and instructed in the use of the
product.
WARNING
The decision to authorise the semi-verticalisation
manoeuvre with the patient on the ScoopEXL
stretcher is the responsibility of the rescue team.
This decision must take into account the patient's
condition and the circumstances in which one is
operating.
9
8
6
© Ferno S.R.L. ScoopEXL - Rel.31102023 - ENG
2
3
5
Figure 34 - Semi-verticalisation with snap-hook restraints
WARNING
Each PIN of the ScoopEXL has a maximum load
capacity of 75 kg. It is therefore also necessary to
take this into account before proceeding with semi-
verticalisation.
Important
In the case of semi-verticalisation, make sure not
to exceed an inclination of 70° and maintain this
position for as long as necessary to carry out the
manoeuvre.
WARNING
As this is a delicate manoeuvre, only perform semi-
verticalisation if strictly necessary.
23