Quick Setup Calibration - Excell SUBe AirCharge Service Manual

EXCELL PRECISION CO., LTD.

Quick Setup Calibration

This page is to quickly initiate the scale, for the other functions configuration,
you can refer the chapters below.
Instructions:
Step 1
 Power off the scale, find the switch SWA1 on the bottom of machine.
 Switch SWA1 to the ADJ position and then turn the power on. The display will
show
Step 2
 Refer to the chapter 3-1 to complete Capacity Setup.
Step 3
 Refer to the chapter 3-2 to complete Linearity Calibration.
Step 4
 Refer to the chapter 3-3 to complete Weight Calibration.
Step 5
 When done the initiation, switch the switch SWA1 back to the LOCK position.
 If the switch SWA1 is switched to the LOCK position during calibration, the machine
will exit the service mode automatically.
020359XX
.
4 ZSME300000434