Quick Setup Calibration - Excell FJ5 Service Manual

EXCELL PRECISION CO., LTD.

Quick Setup Calibration

This page is to quickly initiate the scale, for the other functions configuration, you can refer the
chapters below.
Instructions:
Step 1 :
 Power off the scale and open the case, find the mini-jumper SWA1 on the main
board.
 Switch SWA1 to the ADJ position (EEPROM UNLOCKED) and then turn the power on.
The display will show
Step 2 :
 Refer to the chapter 4-1 at page 28 to complete Specification Setting.
Step 3 :
 Refer to the chapter 4-2 at page 29 to complete Linearity Calibration.
Step 4 :
 Refer to the chapter 4-3 at page 30 to complete Weight Calibration.
Step 5 :
 When done the initiation, switch the jumper SWA1 back to the LOCK position.
45046
.
6
ZSME300000343