Fnc 05 Noise Filter Setting; Fnc 08 Two Weighing Units Setting - Excell SUBe AirCharge Service Manual

EXCELL PRECISION CO., LTD.

2-1-5 FnC 05 Noise Filter Setting

 Only available for non-approval models. (CFn 02 = 0)
Press key
Press key
Press key
Press key

2-1-6 FnC 08 Two Weighing Units Setting

Press key
Press key
020359XX
Returning to the zero point setting
Use or key to key in the parameters or zero point.
Default setting = 0
When the weight on the scale is over 1/3 full capacity, the
function is on.
0  0 4   4d
1   1d 5   5d
2   2d 6   6d
3   3d
Digital switch & Stabilization range setting
Use or key to key in the parameters.
setting = 0
Parameter 0 ~ 9, the larger the number the more stable the
weight.
Filter parameter setting
Use or key
Parameter 0 ~ 9, the larger the number, the faster the filter response.
Fast response can lead to weight instability.
Two weighing units setting
Displays the last saved parameter setting
Use or key
units
Default setting = 0
0  two weighing units function is not activated
To activate two weighing units, please set the 2nd weighing unit
to be:
1  2nd weighing unit in CSP 01
2  3rd weighing unit in CSP 01
3  4th weighing unit in CSP 01
If it set to 1~3, it only displays the 1st weighing unit and the
selected 2nd weighing unit
key  Upward key (from 0 to 9)
key  Downward key (from 9 to 0)
key  Move the cursor to right
key  Move the cursor to left.
13
7   7d
8   8d
9   9d
to key in the parameters.
to key in the parameters for two weighing
Default
Default setting = 5.
ZSME300000434