Excell SUBe AirCharge Service Manual page 8

EXCELL PRECISION CO., LTD.
 Please recharge at once when the symbol
 Charging indicator a) When charging, "Charging" indicator will be red.
b) When the battery is fully charged, "Charging" indicator will be blue.
c) If scale is fully charged, after plugging in, the blue light will turn on after about 5~10
minutes of voltage detection. The "Charging" indicator is to indicate the status of the
charging process and whether the charging is working properly. To check the battery
level, please unplug the AC cable first and turn on scale, and then check the number of
bars under battery symbol for battery level.
Notice for SUBe AirCharge for Wireless Charging
a. While the scale is charging, the spacing between charging plate and scale shall be
within 2mm. Metal objects are prohibited between the spacing; otherwise, it might
cause overheating or burning.
b. After the charging pad is attached in position on the bottom of the scale, charging
indicator will light up in about 5 seconds.
c. Charging without battery will cause charging indicator to flash red and blue. Please
avoid that.
Plug in wireless adapter
from left or from right
020359XX
shows in order to keep the weight accuracy.
Position hole is located
the bottom of the scale
Charging indicator on the display will show:
Red indicates it is charging
Blue indicates it is fully charged
6
Raise the scale and aim the point
near the center. Slide the charging
pad and attach to the position hole
Try to move around the charging
pad and ensure it is well attached.
ZSME300000434