External Weight Calibration - Excell HJW User Manual

EXCELL PRECISION CO., LTD

2-2 External Weight Calibration

Press TARE/PT key, the display
shows the calibration value. The
right digit keeps flashing.
 The calibration value could
be changed
When the right digit is flashing,
press TARE/PT key while
there is no load on platter
Reading Zero
Put the calibrated weight on
platter and press TARE/PT key;
After 3 beep sounds, calibration
completes;
Remove weight
.
ON/ZERO key  Upward key (0~ 9 digit entry )
TARE/PT key  Move cursor rightward
The conditions for external weight calibration:
 The calibration weight value placed on the platter must be over 100e, and the standard
deviation of the weight must be within 10%.
 This function is not available for approval models.
02022010
Press NET/GROSS key
to move the flashing
digit to the left.
kg
.
kg
kg
.
Press NET/GROSS key to exit
UNIT key  Downward key (0,9~1 digit entry)
NET/GROSS key  Move cursor left ward
20
Press NET/GROSS key
to skip
About 2 seconds later
About 2 seconds later
kg
.
ZSME300000197