EXCELL PRECISION CO., LTD. Table of Content Instruction for Use........................2 Preparing to Use the Scale ....................3 Chapter 1 Introduction ......................5 1-1 Features and Specifications ...................5 1-2 Power Supply ......................6 1-3 Display and Keypad Introduction ................6 1-4 Self-Test Mode......................8 1-5 Error Messages ......................9 1-6 Weight Unit ......................9...
EXCELL PRECISION CO., LTD. Thank for your purchasing of our EXCELL Weighing Scale. To guide you to use our product correctly, please read this Manual carefully to extend the life of machine and to avoid error. Instruction for Use 1) Please keep the scale in a cool dry place. Do not store it at high temperature.
EXCELL PRECISION CO., LTD. Please push the clip to take off the dust cover to clean Preparing to Use the Scale 1. Adjust the four levelling feet (if fitted) to set the scale pan level using the spirit level bubble located at the front of the scale.
Page 5
EXCELL PRECISION CO., LTD. Due to the storage battery adopt the advanced free-maintaining technique, customers need not to replenish electrolyte. The scale should be recharged every 3 months to prevent failure of the internal rechargeable battery. 1. The battery should be charged for 8~10 hours.
EXCELL PRECISION CO., LTD. Chapter 1 Introduction 1-1 Features and Specifications Features Sealed waterproof silica gel strip blocks water from infiltrating into the scale. Surrounded by waterproof grade sheeting to ensure the water free. 1/3,000~1/6,000 display resolution available. Aluminum frames coated with anti-corrosion treatment for longer lifespan.
EXCELL PRECISION CO., LTD. 1-2 Power Supply Power Supply Selection 1. 6V / 4Ah、6V / 7Ah storage battery AC 110V~240V (±10%) adapter Power Consumption 25 mA (system + L/C + front display;power saving mode) 35 mA (system + L/C + front and back display;power saving mode)
Page 8
EXCELL PRECISION CO., LTD. When the weigh pan is empty (free of load) and the display is not showing zero, press the ON/ZERO key to zero the scale. At zero, the “ 0 ” indication is on. UNITS: switching units Press the UNITS key to switch weight units, the icons or arrows will indicate the active units as appropriate.
EXCELL PRECISION CO., LTD. 1-4 Self-Test Mode Set the switch SWA1 on the bottom of machine to the LOCK position.When the scale count down, press NET/GROSS and ON/ZERO key together, Wait till display shows to enter “Self-Test Mode”. Press UNITS...
EXCELL PRECISION CO., LTD. 1-5 Error Messages ⇒ Unable to read the EEPROM The EEPROM is not mounted yet, or the circuit near EEPROM is broken. Initial zero is higher than the zero range when switching the scale on. ⇒...
EXCELL PRECISION CO., LTD. Chapter 2 External Function Setting In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LCD shows Press UNITS key Press ON/ZERO key Press UNITS key...
EXCELL PRECISION CO., LTD. 2-1 General Function Setting There are 7 functions in general function setting mode from Workflow of the General Function setting: DISPLAY NOTE ACTIONS ON/ZERO key ⇒ Upward key (from 0 to 9) UNITS key ⇒ Downward key (from 9 to 0) Press TARE key TARE key ⇒...
EXCELL PRECISION CO., LTD. 2-1-1 Power Saving Function Setting Select in the General Function setting mode to change power saving function setting. DISPLAY NOTE ACTIONS Press TARE key The displays shows the last status Default setting = off Use ON/ZERO or UNITS key to select function “on”...
EXCELL PRECISION CO., LTD. 2-1-2 Automatic Power-off Timer Setting Select in the General Function setting mode to change the automatic power-off timer setting. DISPLAY NOTE ACTIONS Press TARE key LED displays the last status Use ON/ZERO or UNITS Automatic power-off timer setting...
EXCELL PRECISION CO., LTD. 2-1-3 Hi/Lo/OK Function Setting Select in the General Function setting mode to set the Hi/Lo/OK function. This function is available in all unit modes. In one specific unit mode, enter to set the Hi/Lo/OK values. NOTE...
EXCELL PRECISION CO., LTD. 2-1-4 Restore to the Default Setting Select in the General Function setting mode to restore to the default setting. DISPLAY NOTE ACTIONS Press TARE key ⇒ Return (Cancel the Use ON/ZERO or UNITS restoration) keys to select “return” or “format”...
EXCELL PRECISION CO., LTD. 2-1-5 Noise Filter Setting Select in the General Function setting mode to set the noise filter setting. NOTE ACTIONS DISPLAY Returning to zero point setting LED displays the last status Press TARE key Returning to the zero point setting...
EXCELL PRECISION CO., LTD. 2-2 Weight Calibration In the weighing mode, press the NET/GROSS and ON/ZERO keys at the same time to enter the External Function setting mode. The LED shows and uses the NET/GROSS or UNITS key to select to enter the weight calibration mode.