Spirit XT385 Owner's Manual page 7

Safety Tether Cord
A safety tether cord is provided with this unit. It is a simple design that should be used at all times.
It is for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether
cord will stop tread-belt movement. To Use:
To Use:
1. Place the safety key into position on the oblong metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the safety key also secures the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The
key has strong enough power to minimize accidental, unexpected stopping. The clip should be
attached securely to make certain it does not come off. Be familiar with its function and
limitations. The treadmill will stop, depending on speed, with a one to two-step coast anytime the
safety key is pulled off the console. Use the Stop/Pause switch in normal operation.
WARNING DECAL REPLACEMENT
The decal shown below has been placed on the treadmill. If the decal is missing or illegible,
please call our Customer Service Department toll-free at 1-888-707-1880 to order a replacement
decal.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
6 Dyaco Canada Inc. 2023