Important Electrical Instructions - Spirit XT385 Owner's Manual

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your equipment. Quality athletic shoes are recommended to avoid leg fatigue.
Do not block the rear of the treadmill. Provide a minimum of 6 feet clearance between the

rear of the treadmill and any fixed object.
Keep children away from the treadmill. There are obvious pinch points and other caution

areas that can cause harm.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.
Use the handrails provided; they are for your safety.

The treadmill is not a medical device.

Please ensure that you review and adhere to the user! weight restrictions
and power requirements of your new machine. Failure to do so may result
in serious injury or damage to your machine.
Remove the tether cord after use to prevent unauthorized treadmill

Important Electrical Instructions

WARNING!
Route the power cord away from any moving part of the treadmill including the elevation
mechanism and transport wheels.
NEVER remove any cover without first disconnecting the AC power. If voltage varies by ten percent
(10%) or more, the performance of your treadmill may be affected. Such conditions are not covered
under your warranty. If you suspect the voltage is low, contact your local power company or a licensed
electrician for proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a
pool or spa, or in any other high-humidity environment. The temperature specification is 40 degrees C,
humidity is 95%, and non-condensing (no water drops forming on surfaces).
Circuit breakers: Avoid AFCI/GFCI circuit breakers if possible. These breakers may trip occasionally
during use because of the high inrush currents from the treadmill drive motor. This condition is an issue
with all treadmills and other products with large motors or electric heating elements like ovens.
New laws in your area may require these breakers. If you do have these breakers and outlets in your
home and are experiencing nuisance tripping, you should check to see if there are any other devices
plugged into the same circuit as fluorescent lights with electronic ballasts, coffee makers, space heaters,
etc. Optimally the treadmill should be the only device plugged into the circuit.
Our treadmills have surge suppressors built in to help avoid nuisance tripping. We have tested several
AFCI/GFCI breakers and outlets with our products that do not trip when only the treadmill is connected.
Brands we have tested are Eaton (Cutler Hammer Series), Leviton (Smart lock pro) and Schneider
Electric (Canadian home series).
This product must be grounded. If the treadmill should malfunction or break down, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This product
is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
SAVE THESE INSTRUCTIONS - THINK SAFETY!
operation.
4 Dyaco Canada Inc. 2023