Module Description - Allen-Bradley 160-RS1 User Manual

Module Description

Product Overview
This chapter contains the following information:
• The physical layout of the module.
• Location of configuration switches.
• Overview and components.
The RS1 Module is an optional interface device designed to provide a
direct, digital link between RS-232 devices and the 160 Drive. The
module connects to the drive through the expansion/keypad port on
the front of the drive. Refer to the figures 1.1 and 1.2 for general
layout of the module and Chapters 4 or 9 for details on the LED
indicators.
Figure 1.1
Module Front View
Status LEDs
Refer to Chapters 4 & 9
for Further Information
9 Pin, Female D-Shell Connector
Refer to Chapter 3 for Details
Chapter
Module Installation Latch
Nameplate
Provides Firmware Version
and Series Letter
1