Table of Contents
Advertisement
Chapter Objectives
Module Description
Product Description
In this chapter, you will read about:
Serial Communications Module features
the location of configuration switches
The Serial Communications Module is an optional interface device
designed to provide a direct digital link between serial
communications devices and any device that uses SCANport. The
current list of products that use SCANport includes: 1305, 1336
PLUS, 1336 FORCE, 1394, SMP3 controllers, and 1557 medium
voltage drives. The module connects to these products via
SCANport.
The Serial Communications Module is available in both Open style
(Figure 1.1) and Enclosed (Figure 1.2) type configurations. The
Open style module mounts inside certain drives, depending on drive
size. The Enclosed module mounts independently and can be used
with any SCANport device. The following table provides more
information about the Open and Enclosed styles.
Designation
Enclosure
Open Style
Open PC Board
Enclosed
IP30
* 7.5HP and higher sizes only, excluding the AQF and BRF catalog number drives
** 7.5HP and higher sizes with Standard Adapter board only
*** analog 1394 only
Power Supply Source
Supplied by the drive
24V DC separately supplied or
120/240V AC separately supplied
1
Chapter
Used With
1336 PLUS*
1336 FORCE**
1394***
1305
1336 PLUS
1336 FORCE
1394
SMP3
Other SCANport products
1203–5.5 September 1995
Advertisement
Table of Contents
