Table of Contents
Advertisement
p–ii
Preface
Reference Manuals
For
Information about the DF1 protocol
Additional information about networking and the SLC™ 500 SLC 500 Modular Hardware Style Manual
Information about the AIC+
Instruction set information for the SLC 500 and MicroLogix™
1000
For general MicroLogix 1000 information
For DriveExplorer™ information
For 160 SSC Drive Information:
A complete listing of current Allen-Bradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CD-ROM or in multi-languages.
A glossary of industrial automation terms and abbreviations Allen-Bradley Industrial Automation Glossary
Safety Precautions
The following documents contain additional information concerning
Allen-Bradley products. To obtain a copy, contact your local Allen-
Bradley Sales Office or visit the "On-Line Publications" area of the
Allen-Bradley home page on the World Wide Web at: www.ab.com.
Read This Document
DF1 Protocol and Command Set Reference Manual 1770-6.5.16
AIC+ Advanced Interface Converter User Manual
SLC 500 and MicroLogix 1000 Instruction Set
Reference Manual
MicroLogix 1000 User Manual
DriveExplorer User Manual
160 SSC User Manual Series A
160 SSC User Manual Series B
160 SSC User Manual Series C
Allen-Bradley Publication Index
ATTENTION: Only personnel familiar with 160 Drives,
!
Communication Modules and associated machinery should
plan or implement the installation, start-up, configuration
and subsequent maintenance of this module. Failure to com-
ply may result in personal injury and/or equipment damage.
ATTENTION: This module contains ESD (Electrostatic
!
Discharge) sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing,
or repairing this assembly. Component damage may result
if ESD control procedures are not followed. If you are not
familiar with static control procedures, reference Allen-
Bradley Publication 8000-4.5.2, Guarding Against Electro-
static Damage or any other applicable ESD protection
handbook.
ATTENTION: The drive contains high voltage capacitors
!
which take time to discharge after removal of AC line power.
Before installing or removing the Communication Module,
ensure isolation of mains supply from line inputs L1, L2,
L3 (R, S, T). Wait the recommended amount of time for the
capacitors to discharge to safe voltage levels (refer to the
160 User Manual for recommended time). Failure to do so
may result in personal injury or death.
ATTENTION: When a system is configured for the first
!
time, the motor must be disconnected from the machine or
process during initial system testing. Hazard of injury or
equipment damage may occur due to unintended or incor-
rect machine motion.
Publication
Number
1747-6.2
1761-6.4
1747-6.15
1761-6.3
9306-5.0
0160-5.0
0160-5.9
0160-5.15
SD499
AG-7.1
Advertisement
Table of Contents
