Table of Contents
Advertisement
SENSOR CHECK & TRIGGERING
When checking the sensors, the tool will tell you which tire should be
triggered first, with the tire highlighted on the screen. You can also select
the tire to be triggered using the directions buttons.
When triggering, put the top of the tool close to the sensor (or the valve on
the tire) and click
button.
The tool will scan the closest sensor around and show the data from the
sensor when detected.
TPMS DIAGNOSTICS
Before performing diagnostics, please check "Vehicle Communication" and connect the device to the vehicle.
When you click "diagnostics" menu, the device will try to establish connections to the vehicle.
When connected, the tool will check the info from TPMS and show it on the screen.
The screen will also show the fault codes that are present inside the system; click "View Fault Code" to check details, and
click "Clear fault code" to clear them.
⚠ Note: If you checked the sensors before going into diagnostics, the sensor ID will show the IDs that were
found when triggering them.
⚠ Note: Before clearing the fault codes, make sure you have fixed the problem that are described by the
fault codes.
7
Advertisement
Table of Contents
