Settings; Wifi Settings; Update; Pressure Unit Settings - Xtool TP Series User Manual

3. S
ETTINGS
Click the Settings button to adjust the default settings.

WIFI SETTINGS

Select available Wi-Fi hotspot and connect. For more information, please check "Update".

UPDATE

Use this menu to update the software. For more information, please check "Update".

PRESSURE UNIT SETTINGS

Select the pressure unit shown on the device. You can choose between kPa, psi or BAR.

TEMPERATURE UNIT SETTINGS

Select the pressure unit shown on the device. You can choose between deg C and deg F.

SENSOR ID FORMAT SETTINGS

Select the sensor ID format shown on the device. You can choose between decimal or hexadecimal.

DISTRICT SETTINGS

Select the area that the vehicle is manufactured.
⚠ Note: The same model that are manufactured for different markets may use different sensors or different
frequencies. Please check district settings before you working on vehicles.

AUTO POWER-OFF SETTINGS

Set the standby time before the device turns off automatically.

SOUND SETTINGS

Select whether you need to turn on the beep sound when clicking the buttons.
12