Sensor Triggering; Charging The Device - Xtool TP Series User Manual

5. When running a Diagnostics function, DO NOT shut down the scan tool directly. You should cancel the task before
returning to the main interface and then shutting down the tool.

SENSOR TRIGGERING

CHARGING THE DEVICE

The scan tool may need to be charged before first use. Use the proper power adapter (either 120 VAC North American or
240 VAC European version) and attach it onto the AC/DC charger.
Plug the AC/DC charger into a wall outlet and charging this scan tool by USB Type-C port.
The device can also be charged with PC or OBD connection, and the tool can be used when charging.
In order to keep the device in best performance, please fully charge the battery. We suggest to charge at least 2 hours
before usage for the first time.
The picture on the left shows how the device can trigger the tire-pressure sensor.
1. Select activation or program menu on the device;
2. Put the device close to the sensor (if the sensor is already installed inside the tire,
close to the valve);
3. Click button to start triggering.
⚠ Note: When triggering sensors, we suggest to put the sensor that
needs to be triggered 10 cm (4 inch) close to the device. And to avoid
interference, please put other sensors 2 meters (7 feet) away from the
device if possible.
5