Orientalmotor alphaSTEP ARL Series Setting Manual page 8

3 Startup operation
Program mode (PRG)
It allows the user to create and edit the motor operating data.
Selected operating
F1
F2
F3
F4
ESC
Parameter mode (PAR)
It allows the user to set and edit the parameters.
Data description
F1
F2
F3
F4
ESC
−8−
data No.
F1
Switch to the parameter mode.
Switch to a screen in which you can confirm the clearing of data.
Press the SHIFT and F2
confirm the clearing of all data.
Switch to a screen in which you can confirm data insertion.
Switch to a screen in which you can confirm data deletion.
Switch to the monitor mode.
F1
Switch to the test mode.
Switch to the I/O parameters selection screen.
Press the SHIFT and F2
confirm the clearing parameters.
Switch to the motor parameters setting screen.
Press the SHIFT and F3
screen.
Switch to the speed parameters setting screen.
Press the SHIFT and F4
screen.
Switch to the program mode.
F2 F3
at the same time to switch to the screen in which you can
F2 F3 F4
at the same time to switch to the screen in which you can
at the same time to switch to the home parameters setting
at the same time to switch to the common parameters setting
Driver ID
Data description
Press the [ENT] key to
enter/change the data.
F4
Driver ID
Press the [SHIFT] key
to switch to another
parameter setting screen.