Table of Contents
Advertisement
8 Manual operation and I/O checking
2 stations occupied
Monitor item
I/O
RIO
RY1
RY2
RY3
RY4
(RY5)
RY5 (RY6)
(RY7)
RY
RX1
RX2
RX3
RX4
RX5
RX6
(RX7)
(RX8)
(RX9)
(RX10)
(RX11)
RX7 (RX12)
∗1 When PRESET is selected.
−48−
Display
START
∗ is displayed if the signal is ON.
• is displayed if the signal is OFF.
STOP
FREE
∗1
HOME/PRESET
∗ is displayed if the signal is ON.
FWD
• is displayed if the signal is OFF.
RVS
ACL
M
The selected data No. is displayed in the M field.
Bit
A bit image is displayed in the Bit field. Each bit
M5
corresponds to bits M5, M4, M3, M2, M1 and M0.
M4
∗ is displayed for each of the M5, M4 and M3 signals
if it is ON, while • is displayed if it is OFF.
M3
∗ is displayed if the signal is ON.
M2
M1
• is displayed if the signal is OFF.
M0
∗ is displayed if the signal is ON.
(M-REQ)
(R-REQ)
• is displayed if the signal is OFF.
(W-REQ)
∗ is displayed if the signal is ON.
(TRQ)
(TFW)
• is displayed if the signal is OFF.
(TRV)
(THS)
(TAI)
(TWRQ)
∗ is displayed if the signal is ON.
(+LS)
• is displayed if the signal is OFF.
(−LS)
ALL
The status of all RY can be checked.
∗ is displayed if the signal is ON.
• is displayed if the signal is OFF.
The RY are, from the left above, START, STOP,
FREE, HOME/PRESET, FWD, RVS, ACL, (M-REQ,
R-REQ and W-REQ).
The RX are, from the left below, M5, M4, M3, M2, M1,
M0, T-REQ, T-FWD, T-RVS, T-HSPD, T-AIC,
TW-REQ, (+LS and −LS).
MOVE
Press the F4 to change the status of MOVE to ON
F4: ON/OFF
or OFF.
END
Press the F4 to change the status of END to ON
F4: ON/OFF
or OFF.
T-UP
Press the F4 to change the status of T-UP to ON
F4: ON/OFF
or OFF.
/ALM
Press the F4 to change the status of /ALM to ON
F4: ON/OFF
or OFF.
AREA
Press the F4 to change the status of AREA to ON
F4: ON/OFF
or OFF.
TIM
Press the F4 to change the status of TIM to ON or
F4: ON/OFF
OFF.
(R-ERR)
Press the F4 to change the status of R-ERR to
F4: ON/OFF
ON or OFF.
(S-BSY)
Press the F4 to change the status of S-BSY to ON
F4: ON/OFF
or OFF.
(M-BSY)
Press the F4 to change the status of M-BSY to
F4: ON/OFF
ON or OFF.
(R-END)
Press the F4 to change the status of R-END to
F4: ON/OFF
ON or OFF.
(W-END)
Press the F4 to change the status of W-END to
F4: ON/OFF
ON or OFF.
(T-RDY)
Press the F4 to change the status of T-RDY to ON
F4: ON/OFF
or OFF.
Description
Display range
∗
•
∗
•
00 to 63
0: OFF
1: ON
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
∗
•
Advertisement
Table of Contents
