Necessary Software Configuration Under Windows 8 - Digigram ALP-Dante User Manual

User Manual for ALP-DANTE
5.2 Necessary software configuration under Windows
ALP cards operate under Windows from 64-bit versions of Windows 10 from version 20H2.
To use your ALP-X card, you must install the driver included in the installation kit "ALP-X Kit".
Download the latest version from the digigram website from the
This driver supports all the ALP cards.
The "ALP-X Kit" installer is used to install the following components:
● a 64-bit WDM driver offering the WASAPI and DirectSound application interfaces,
● an ASIO driver (32 bits and 64 bits), with its "ALP-X ASIO Settings" configuration interface.
Installing this component is optional,
● the "ALP-X Manager" application, which serves to adjust/view the ALP-X cards settings..
Installing this component is optional.
In your Windows system, It may be necessary to allow the applications to access the input
audio devices of the sound cards.
Please proceed as follows:
● Go to the Windows Settings, and select Privacy.
● Select "Microphone"
● Activate the option "Allow apps to access your microphone" as shown here-after:
It is also necessary to have the "Windows Audio Endpoint Builder" running under Windows
so that the WASAPI audio devices can be used.. On some Windows setups, this service may
not be activated by default.
ALP-Dante card support page.
8