Table of Contents
Advertisement
User Manual – ALP222e & ALP222e-Mic
5.2 Necessary software configuration under Windows
ALP222e and ALP222e-Mic operate under Windows from 64-bit versions of Windows 10 (from
version 20H2).
To use your ALP-X card, you must install the driver included in the installation kit "ALP-X Kit".
Download the latest version from the digigram website from the
the
ALP222e-Mic support page
The "ALP-X Kit" installer is used to install the following components:
● a 64-bit WDM driver offering the WASAPI and DirectSound application interfaces,
● an ASIO driver (64 bits and 32 bits), with its "ALP-X ASIO Settings" configuration interface.
Installing this component is optional,
● the "ALP-X Manager" application, which serves to adjust the ALP-X card settings and display
the vu-meters. Installing this component is optional.
Note for Windows Server operating systems
Under Windows server, it is necessary to allow the applications to access the input audio devices of
the sound cards.
Please proceed as follows:
Go to the Windows Settings, and select Privacy.
●
Select "Microphone"
●
Activate the option "Allow apps to access your microphone"
●
5.3 Necessary software configuration under Linux
ALP222e and ALP222e-Mic operate under Linux from the 64-bit Kernel 4.1x onwards.
The Alsa driver for Linux is available for downloading. It is supplied as a DKMS package, which can
therefore be used to compile the driver for the target Linux distribution used.
(these two pages point to the same driver kit).
ALP222e card support page
or from
11
Advertisement
Table of Contents
