User Manual for ALP-DANTE
7.2 Updating the driver version
If you want to install a new driver version, double click on the new driver installation file "ALP-X Kit
vxx.exe" (see the detailed procedure in the hereinabove chapter
7.3 Updating the firmware
The ALP card features two on-board firmware: the "Dante" dedicated firmware, and the board
firmware. Updating the firmware can be done from the AVS-Monitor application (see chapter
Firmware update
procedure). Both firmware can be updated from this application.
-
7.4 Verifying the card installation
Once the driver and card have been installed as per the process described hereinabove, you can
verify that the card is installed correctly and working properly.
settings. There is no need to install it if
no application reliant on the ASIO
interface is used.
The driver is installed by default in the folder
"C:\Program Files (x86)\Digigram\ALP-X".
To change this folder, click on Browse and
select a new destination.
Click on Install to continue with the
installation.
The driver and selected components are
being installed.
"Very first
installation").
14