Replacing A Card; Changing The Order Of Installed Cards - Digigram ALP-Dante User Manual

User Manual for ALP-DANTE
Select the new value, and click on "Ok".
The PC must be restarted.

7.6 Replacing a card

If an ALP card has to be replaced by another one, it is strongly recommended to proceed as follows:
Turn off the PC.
●
Remove the card to be replaced.
●
Restart the PC.
●
Go to the Windows Device Manager, and select "Sound, video and game controllers".
●
From the "View" menu, select "Show Hidden devices".
Select the ALP card that was hidden and select "Uninstall".
Turn off the PC.
●
Insert the new card.
●
Restart the PC.
●

7.7 Changing the order of installed cards

If several ALP cards are installed, and you want to move cards from a slot to another, it is strongly
recommended to proceed as follows:
Turn off the PC.
●
Remove the cards to be moved.
●
Restart the PC.
●
Go to the Windows Device Manager, and select "Sound, video and game controllers".
●
From the "View" menu, select "Show Hidden devices".
Select the ALP cards that were hidden and select "Uninstall".
Turn off the PC.
●
Insert the cards in the appropriate slots.
●
Restart the PC.
●
Internal buffer: size of the buffers
exchanged between the card and the driver.
The size is expressed in samples (ex: at 48
kHz, a value of 48 corresponds to 1ms buffer).
Samples / Position update: This parameter
should not be modified without prior
technical advice from Digigram. It serves for
cases where audio dropouts are experienced
whatever is the internal buffer setting.
Sampling rate: Select the sampling rate of
the ALP-DANTE card. The ALP-X Manager
application must be closed before selecting a
new sampling rate value.
18