Firmware Update Procedure - Digigram ALP-Dante User Manual

User Manual for ALP-DANTE
Click on this icon to display the concerned pair of channels as one stereo
Channel strip name
Click on the channel strip name
Note: when a channel strip display is changed from mono to stereo, or
As a consequence, it is recommended to keep the display mode used

9.4 Firmware update procedure

The ALP-DANTE card on-board firmware may have to be upgraded, and updates can be supplied by
Digigram and prove necessary.
The firmware update has to be done from the AVS-Monitor application, which allows applying a new
firmware through the Dante network. AVS-Monitor is an application from the company Auvitran
which is owned by Digigram. It runs under Windows, and accesses the ALP-DANTE card through the
Dante network. As a consequence, the NIC card selected in AVS-Monitor must be connected to the
Dante network.
In case you have not already downloaded this application, click on the button
"Firmware version" field, as shown on the screen capture below.
AVS-Monitor is constantly updated on Auvitran's WEBsite. It always includes the most recent
firmware version for the card. In case the PC running AVS-Monitor is connected to the internet,
AVS-Monitor is updated.
When AVS-Monitor is started and the NIC card connected to the Dante network is selected,
AVS-Monitor automatically detects the Dante products on the network.
channel strip.
stereo to mono, the channel stream name goes back to the default
name.
(mono or stereo) when the channel strip names have been
changed.
and enter a new name.
on the right of the
23