Adjusting The Internal Latency Of The Card - Digigram ALP-Dante User Manual

User Manual for ALP-DANTE
All the present ALP cards must be listed in the "ACTIVE CARDS GROUP" selection list.

7.5 Adjusting the internal latency of the card

The internal latency of the card is determined by the duration of sample buffers the card exchanges
with the PC for playback and recording audio streams. By default, this duration is 32 sampling clock
periods (0.67ms at 48 kHz).
The lower the internal latency, the lower the global latency of the card. However, a very low latency
may lead to "choppy" audio on slow PCs. In this case it is necessary to increase the internal latency.
The internal latency of the card can be changed by electing the properties of the card, from the
Windows Device Manager:
Right click on the ALP card, and select Properties, Advanced. The following window is displayed:
17