Table of Contents
Advertisement
User Manual for ALP-DANTE
9 CONFIGURING THE CARD UNDER WINDOWS
VIA THE ALP-X MANAGER APPLICATION
This application can be launched from the shortcut created on the desktop or from the start menu,
Digigram group.
9.1 Installed ALP cards
When the application is launched, the window below is displayed and shows all the ALP cards
installed in the PC.
If another view is displayed, click on the
detected.
The following settings are displayed for each ALP card detected:
its name: this is the name of the card on the ante network. This name can be modified from
●
the Dante Controller application.
its serial number,
●
the on-board firmware version,
●
the size of buffers exchanged between the driver and the card (see
●
latency of the
card).
9.2 Sampling clock
The sampling clock of the card is configurable from the Device Manager. The ALP-X Manager
application must be closed before changing the sampling clock value.
Open the Windows device Manager, select the item "Sound, video and game controllers", and right
click on your ALP-DANTE card to open its "Properties" control panel. Select the appropriate sampling
frequency values.
icon to display the list of ALP cards present and
Adjusting the internal
20
Advertisement
Table of Contents
