Table of Contents
Advertisement
User Manual for ALP-DANTE
To update the firmware of the products, select "Launch Firmware manager" from the "Control"
menu.
The Firmware manager application is started.
If the ALP-DANTE card(s) appears with unchecked boxes as shown below, this means that no
firmware update is to be done.
If the ALP-DANTE card boxes are checked, then select "Update" on the bottom right of the Firmware
Manager window to start the firmware update. Do not shut down the PC hosting the ALP-DANTE
card during the firmware update.
A shutdown and restart of the computer hosting the ALP-DANTE card is necessary to take into
account the new firmware.
9.5 Creating, saving and loading setting sessions
The current configuration of all settings defined in ALP-X Manager can be saved. Go to the File menu
and select "Save session as".
To load a configuration, go to the File menu and select "Open session".
To create a new configuration from blank settings, go to the File menu and select "New session".
24
Advertisement
Table of Contents
