User Manual for ALP442e & ALP442e-MIC
5.2 Necessary software configuration under Windows
ALP cards operate under Windows from 64-bit versions of Windows 10 from version 20H2, and from
Windows
To use your ALP-X card, you must install the driver included in the installation kit "ALP-X Kit". Download
the latest version from the digigram website from the
ALP882e-Mic
support
The "ALP-X Kit" installer is used to install the following components:
● a 64-bit WDM driver offering the WASAPI and DirectSound application interfaces,
● an ASIO driver (32 bits and 64 bits), with its "ALP-X ASIO Settings" configuration interface.
Installing this component is optional,
● the "ALP-X Manager" application, which serves to adjust the ALP-X card settings and display
the vu-meters. Installing this component is optional.
Note
for
Under Windows server, it is necessary to allow the applications to access the input audio devices of
the
Please proceed as follows:
Go to the Windows Settings, and select Privacy.
●
Select "Microphone"
●
Activate the option "Allow apps to access your microphone"
●
5.3 Necessary software configuration under Linux
ALP
cards
operate
The Alsa driver for Linux is available for downloading. It is supplied as a DKMS package, which can
therefore be used to compile the driver for the target Linux distribution used.
ALP882e & ALP882e-MIC
,
Server
page
(these
two
pages
Windows
sound
under
Linux
from
ALP882e card support page
point
to
the
Server
operating
the
64-bit
Kernel
2019.
or from the
same
driver
kit).
systems
cards.
4.1x
onwards.
13