Tesla LASER AI300 PLUS User Manual page 2

Safety Instructions
Before using this product, read the following safety instructions and follow all conventional
safety precautions. Read this manual carefully, and keep it properly.
Any operation not conforming to this manual may cause damage to this product.
Cautions
1.Only authorized technicians can disassemble this product. Users are not recommended to
disassemble this product by themselves.
2.Use only the power adapter provided by the manufacturer for this product. Use of other
adapters may cause damage to this product.
3.Do not touch wires, sockets, or power adapter when your hands are wet.
4.Do not roll the curtain or body parts into the product drive wheel.
5.Keep this product away from cigarettes, lighters and other open flames.
6.Clean the product after charging.
7.Do not bend the wire excessively, or place heavy objects and sharp objects over the machi-
ne.
8.This product is intended for indoor use. Do not use it outdoors.
9.Do not sit on the product.
10.Do not use this product in a humid environment, such as the bathroom.
11.Before using this product, remove all vulnerable items (such as glasses and lamps) on the
ground, as well as articles that may entangle the edge brush and suction channel (such as
wires, paper, and curtains).
12.Do not place the product in a place where it is easy to fall off (such as tables and chairs).
13.Check carefully that the power adapter is connected with the socket before use; otherwise
the battery may be damaged.
14.To prevent tripping over the product, inform other members of the house when the produ-
ct is working.
15.When the dust box is full, empty the dust box before using this product.
16.The operating temperature of this product is 0°C to 40°C.
17.Do not use this product in a high temperature environment.
18.Remove the battery from the product before scrapping it.
19.When removing the battery, make sure that the product is disconnected from the power
supply.
20.Properly recycle the waste batteries.
The laser ranging sensor complies with IEC 60825-1:2014 class 1 laser product standard and
does not produce dangerous laser radiation.
Warnings
1.Use only the original rechargeable battery and docking station provided by the manufactu-
rer. Do not use non-rechargeable batteries. For battery specifications, see „Product Specifi-
cations".
2.Do not use the product in an environment with open flames or fragile products.
3.Do not use the product in an extremely hot (above 40°C) or extremely cold (below 0°C)
environment.
4.Keep the hair, clothes, fingers and other parts of the human body away from the opening or
operating parts of the product.
5.Do not use the product on wet or water-filled ground.
6.Do not use the product to vacuum any items that may block the product, such as stones
and waste paper.
7.Do not use the product to vacuum any flammable materials, such as gasoline and toner
used in printers or copying machines. Do not use the product in clean areas with flammable
materials.
8.Do not use the product to vacuum any burning items, such as cigarettes, matches, ashes
and other items that may cause fire.
9.Do not place any articles at the suction port. Do not use the product when the suction port
is blocked. Remove the dust, cotton wool and hair from the suction port to ensure smooth air
circulation at the suction port.
10.Handle the power cord with care to avoid damage. Do not use the power cord to drag or
pull the product and its docking station, use the power cord as a handle, clamp the power
cord in the door gap, or pull the power cord at sharp corners. Do not run the product over
the power cord. Keep the power cord away from heat sources.
11.Do not use a damaged docking station.
12.Even if the product is severely damaged, do not burn the product, as the product battery
may explode.
2