Tesla LASER AI300 PLUS User Manual page 13

Set a restricted zone/ invisible wall
You can set a restricted zone or invisible wall in the app. After the setting is comple-
ted, the robot will not enter the restricted zone or cross the invisible wall for cleaning.
Notes:
Before using this function, you need to open the map save mode in the APP setting.
This function is only used to divide cleaning zones but cannot be used to block dan-
gerous zones.
If the vacuum cleaner is moved or there are big changes in the home, the map may
become invalid and the settings of the invisible wall or restricted zone may be lost.
mopping
restricted zone
Clean selected zones
You can select cleaning zones in the app. The robot will clean one or more rooms
based on the zones that you select on the app map, and you can set room cleaning
times in the current mode.
Notes:
Before using this function, you need to open the map save mode in APP setting and
the robot has to generate a map for cleaning.
visual wall
cleaning restricted zone
After cleaning starts, the robot may move to a place beyond the selected zone.
Make sure that you have cleared the obstacles on the ground around the selected
zone, which cannot be used for safety isolation.
Real-time map update
Invisible wall and restricted zone
setting information display in Cleaning
record
Manual control
Volume adjustment
APP customized mode: judge to clean
based on whole room or single zone
Zone-based cleaning method
(1) Cleaning sequence
(2) Cleaning/mopping time
(3) Fan speed
(4) Water tank capacity
13
Download of multi-language
Map management: display of the invisi-
ble wall and restricted zone
Firmware update
Robot positioning
Zone separation, zone integration,
zone restoration, Adding the map
loading interaction prompt and the
synchronization success or failure
prompt
Choose quiet, standard or Powerful
mode in the APP. Standard by default
EN