Supermicro SuperServer SYS-E200-12D-10C User Manual page 30

Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button with a setting in the BIOS. To turn off the power when the system is in suspend mode,
press the button for 4 seconds or longer.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system.
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1.
Chapter 3 Motherboard Connections
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3 V
6 PWR Supply Fail
30