Table of Contents
Advertisement
Installing Rack Mounting Brackets
The chassis can be mounted in a rack using two rack brackets and a two-part power adapter
shelf bracket (optional, MCP-290-10110-0B).
1. Attach the rack brackets using three screws through the holes in each bracket to secure
the bracket to the chassis.
2. Install the handles, using two screws through the bracket and into each handle.
3. If you are using the optional power adapter bracket, install the power adapter on its bracket.
Place it as shown, then add the retention bracket using two screws.
4. Mount the power adapter bracket assembly on the right side of the chassis using three
screws.
Rack Bracket
Figure 1-9. Installing Rack Mounting Brackets
Rack Bracket
16
Chapter 1: Introduction
Power Adapter
Bracket
P o w e r A d a p t e r
Retention Bracket
Advertisement
Table of Contents
