Supermicro SuperServer SYS-E200-12D-10C User Manual page 15

Chapter 1: Introduction
Figure 1-7. Installing Mounting Brackets
(Brackets extending out from the chassis)
3. If the system is to be mounted on a sturdy surface such as wall mount, it should be on
dry wall and use screws or nails of sufficient strength to support the weight of the system.
4. Please make sure the rear I/O bezel faces up when wall mounting to the system.
Rear I/O and bezel side: facing up
Power button side: facing down
Figure 1-8. Wall Mount Orientation
15