Add A Daily Program - Dantherm DanX 1 User Manual

4. CONTROLS

4.4.1.2 Add a daily program

Normally in the Unit Time Program you only need to add a new daily time program if you
want to include bank holidays or other special days, where opening and closing times are
different from the usual days of the week. Open the Unit Time Program and highlight Spcl.
Day, as shown below.
Now press the Rotate button and the following display appears:
Highlight the line with Daily Programs and press the Rotate button again and the following
display appears:
Under this Daily Program it is possible to modify
(here D1) as described in chapter 4.4.1.1, but also to add a new daily program for a bank
holiday or another special day. To add a new daily program, you must highlight the
on the right top of the screen and press the Rotate button. You will now see the following
display:
You can now add a new daily program by making a copy of an old one, like for example D1
in this case. But you can of course choose any existing program to make a copy of it. By
highlighting D1 and again pressing the Rotate button you have now made a copy of the
daily program D1. The new program is called DP_1 and is shown below.
or delete
25
the selected daily program
icon