Advertisement
Quick Links
Advertisement
Related Manuals for Dantherm DanX 1
Summary of Contents for Dantherm DanX 1
- Page 1 DanX 1/2/3 Touch Panel Installation / User manual Rev. 1.0 - 108146...
- Page 2 Power off the DanX 1/2/3 unit at the main power switch. Connect the 4 terminals of the touch panel to the 4 terminals of the DanX HP or XD in the following way:...
- Page 3 2.0 Touch Panel setup Take a pen and click on the Dantherm logo on the start screen and follow the instructions. This will calibrate the screen. 3.0 Touch panel pages There are four different kind of pages, the start/info pages, the set point pages, the alarm page and the page for start/stop the unit.
- Page 4 3.2 Info pages Touch the black info button and you can now see two pages with information´s about the unit. There will be no information`s about the compressor on a DanX XD unit. 3.3 Setpoint pages Touch the green tool button and you will be asked for a password which is 2222. You will now be able to set in the correct setpoints for the unit.
- Page 5 3.4 Touch panel settings The Communication button is only for the service technician where he can check the Modbus connection between unit and touch panel. The Settings button will open a new page where you find the following possibilities: Touchscreen click. Activate this option when you want to hear a click sound when touching the screen Touchscreen finger mode.
- Page 6 3.6 Unit start/stop page Touch the icon with the Unit Status and you will be asked for a password which is 2222. Now the page with the ON/OFF button will open. Now touch the OFF button. The OFF icon will now disappear and the ON icon will pop up. Wait for a few seconds before touching the Home button.
- Page 7 4.0 Activating the touch panel set points in the MVC80 Press the Tool button of the MVC80 controller without entering a password and go to: - Time Program and from there to Unit Configuration: - Open the program D1-7 you will find there the point “BMS_SP_Control”. Now set the point “BMS_SP_Control”...
- Page 8 Dantherm A/S Marienlystvej 65 7800 Skive Dänemark www.dantherm.com service@dantherm.com ________________________________________________________________________________________________________...