Mvc 80 Controller - Dantherm DanX 1 User Manual

4. CONTROLS

4.2 MVC 80 controller

The DanX 1/2/3 control system is based on a Honeywell MVC 80 controller, with a software
program by Dantherm to perform control strategies and functions in the most energy efficient
way.
(1) LCD display.
Generally, when the display has not been in use, the display will show the following
information. For easier reading press any button to light up the display.
You will now see the actual day, month, year and time at the top and the actual pool hall
condition (Temperature and Humidity) below. For a more exact explanation see 4.3 Quick
access.
(2) Operating keys. These keys provide the following functions:
Home key calls up the Home menu, which provides information about the unit
status. The Home menu is displayed by default if no operating key has been
pressed for 10 minutes.
Application keys 1 and 2, not used in this unit.
Service key calls up the Service menu including user service functions and
Installer Service submenu.
Alarm key calls up the Alarm menu, which provides information about alarm
history, critical and non-critical alarms and acknowledges alarms.
Cancel key returns to the previous screen, discards current inputs and confirms
alarm messages
14