Table of Contents
Advertisement
4. CONTROLS
To either change the time or the unit status, highlight the point you want to change and
press the Rotate button. Rotate the Rotate button until you have found the right value and
then press the button again to accept. Go back to the last menu by pressing the
key.
If you want to have more than one start and stop time switch point for one day, you must add
a new switch point to the daily program by highlighting the
button. You will enter the following display.
If for example you want to change the fan speed for the open pool at 11:00 am you set the
time and unit status as before and go back to the last menu by pressing the
You will now see that you have added a third line into your D1 daily program.
If you want to delete this switch point again, highlight the line and press the Rotate button.
You will see the following display:
Highlight now the
delete this switch point. Press yes and the switch point disappears.
• Open pool with fans in low speed
• Open pool with fans in high speed
• Closed pool with fans in low speed
• Closed pool with fans in high speed
• Unit stopped
icon and press the Rotate button. You will now be asked if you want to
24
Cancel
icon and press the Rotate
Cancel key.
Advertisement
Table of Contents
