Service Menu; Set Point Change In Unit Time Program - Dantherm DanX 1 User Manual

4. CONTROLS

4.4 Service Menu

To enter the service menu, you must press the Service Button and the following display will
appear.
If you want to make changes in the Service menu, you can either "Continue" without a
password to make changes in the two Time programs, or you have to first enter your
password "Login Installer" to use the other service points. See chapter 4.3.1 for instructions.
When "Continue" is highlighted, press the Rotate button and you will enter the following
display:
Here you will find the following unit status points (if you cannot see them please scroll down
by rotating the Rotate button):
•
Operating Hours (For service use only)
•
Trending (For service use only)
•
Interface Config (See 4.4.3)
•
Time Program (See 4.4.1 and 4.4.2)
•
Point Data (For service use only)
•
System Data (See 4.4.4)

4.4.1 Set Point change in Unit Time Program

When pressing the Rotate button with "Time Program" highlighted you will enter the
following display.
There are two Time programs in the controller, one for open / closed pool and fan speed
settings (Unit Time Program) and one for the unit configuration (Unit configuration).
22