Table of Contents
Advertisement
4. CONTROLS
(3) Rotate & Push button, which works as follows:
• Navigates through menus and
lists
• Highlights items (menu, list,
option, value, command
symbol)
• Adjust options (On, Off, etc.)
and values (temperature,
humidity, etc.)
• Selects items (menu, list,
option, value, command
symbol)
• Saves options and values
(4) LED´s, which indicate the operational status of the controller. In the DanX 1/2/3
application only the Power LED and the Alarm LED are in function.
Power LED (Green)
1
2
Alarm LED (red)
1
2
3
Turning the button
Pushing the button
Power LED behaviour
ON
OFF
Alarm LED behaviour
OFF after power up
Lit continuously after power up
Flashes continuously
4 x ON/OFF followed by pause
Navigate – Highlight - Adjust
Select - Save
Controller has encountered a hardware
Sensor failure of analog input
15
Reason
Normal operation
Power supply not OK
Reason
Normal operation
problem.
Advertisement
Table of Contents
