Modify A Daily Program - Dantherm DanX 1 User Manual

4. CONTROLS
To enter one of the time programs, highlight it and press the Rotate button. You will enter
the following display for the Unit Time Program:
1) Gateway to the special day programs
2) Icon for editing the day time program
3) Shows the different days of the week (scroll down by rotating the Rotate button to
see the other days)
4) Shows which daily program (D1, D2, ...) is connected to each day

4.4.1.1 Modify a daily program

If you want to modify the day program for Monday (D1), highlight the
Rotate button. You will now see the following display:
All seven daily programs (D1-D7) are built up in the same way and contain a starting time
switch point (Program_Status Open) when the pool opens and a closing time switch point
(Program_Status Close) when the pool shuts down. If you want for example to change the
opening time, highlight the switch point (Program_Status Open) and press the Rotate
button. You will now see the following display:
You now see in the first line the start time and in the second the status of the pool and unit
which can be either:
23
icon and press the