4. CONTROLS
4.4 Fast access lists
Under this icon you have the following possibility:
•
Change the Set points
•
See the Unit Status
•
Change the Unit Configuration
•
Modify Control Loops
4.4.3 Set point menu
When pressing the Rotate button with "Setpoints" highlighted you will enter the following
display.
Here you will find the following set points (if you cannot see them please scroll down by
rotating the Rotate button):
•
Temperature_Open_Pool (Setpoint temperature in the pool hall when pool open)
•
Temperature_Closed_Pool (Setpoint temperature in pool hall when pool closed)
•
Humidity_Open_Pool (Setpoint humidity in the pool hall when pool open)
•
Humidity_Closed_Pool (Setpoint humidity in pool hall when pool closed)
•
Supply_Fan_Low_Airvolume (Setpoint low air volume)
•
Supply_Fan_High_Airvolume (Setpoint high air volume)
•
Return_Fan_Low_Airvolume (Setpoint low air volume)
•
Return_Fan_High_Airvolume (Setpoint high air volume)
•
Min_Fresh_Air (Setpoint minimum fresh air amount)
•
Min_Supply_Temperature (Setpoint minimum supply air temperature)
•
Max_Supply_Temperature (Setpoint maximum supply air temperature)
All points are read only for the Guest and can only be set into manual with the Operator /
System Administrator password.
20