Sun Microsystems Ultra 30 Installation Manual page 21

9. Using three of the provided screws, fasten the rear mounting bar to the rear of the
rackmounting tray (
Place the rear mounting bar so that it overlaps the base of the system. Feed the
screws through the rear mounting bar flange and fasten them through the slots into
the mounting tray. These screws do not fasten to the system.
Fastening the Ultra 30/60 System to the Mounting Tray
FIGURE 14
).
FIGURE 14
Sun Ultra 30/60/80 Systems Rackmount Installation Guide
Rear bracket
overlapping
system
17